Your needs, this model
Does it fit your priorities?
What does the exact ED page establish?
The mattress is 60 by 80 by 20 inches with a 600 lb maximum total load.
Explore this need in the finder →Can the earlier EP voltage be assumed?
No. Confirm the actual ED appliance rating; its exact page does not state input.
Explore this need in the finder →Does this model maintain pressure automatically?
No automatic top-up is documented by the exact ED source.
Explore this need in the finder →The64163ED is a twenty-inch Queen for someone who wants a higher inflatable surface, a double-layer sheet-tucking design and an internal electric pump. Its current exact Intex page gives60 by80 by20 inches and a600-pound maximum total load. These facts support a useful assessment without treatingED as an automatically interchangeable suffix for the earlier64163EP.
Keep ED distinct from the earlier EP evidence
The inheritedEP reference has the same stated footprint and height and historical110-120V documentation. The currentED page does not state its actual input rating or provide an exact manufacturer crosswalk. We therefore retain theED record separately and leave its voltage unknown. Check the actualED label when comparing an offer rather than importing theEP rating.
Plan twenty-inch height and sheet tucking
The mattress rectangle uses about33.3 square feet, before standing space and luggage. Twenty inches may suit a guest who prefers a higher bed, but it does not add length or reduce room demand. Compare the height with a familiar surface and leave a clear route around the mattress. An inflatable edge is not a rigid transfer aid.
Queen sheets are the sensible starting point for60 by80 inches. The double-layer construction is expressly designed to allow tucking, but the pocket and elastic still need to fit the inflated mattress. Test the actual bedding before the visit. The official velvety top and Fiber-Tech construction identify design features without establishing independent comfort or service-life results.
Check the pump and total-load limits
The internal pump is described as inflating and deflating, with roughly four minutes for inflation. That estimate is not an automatic-stop claim, and automatic pressure maintenance is not established. A non-mains alternative is also unverified on the exactED page. The600-pound limit is total load across the bed, not600 pounds per sleeper.
Choose64163ED for its documented tallQueen shape and bedding design, after the electrical requirements are checked. If the offer is actuallyEP, use that edition's evidence instead. Similar names and matching dimensions help comparison but do not by themselves prove an electrical or generational identity.
Sources consulted October 22, 2026: Intex 64163ED exact official product page.
Key details at a glance
| Named sleeping size | Queen |
|---|---|
| Bed format | Raised floor mattress |
| Mattress length | 80 in |
| Mattress width | 60 in |
| Bed height | 20 in |
| Rated total load | 600 lb |
| Pump power | Built-in electric pump; input not stated on the exact ED page |
| Built-in pump | Yes |
| Pump included | Yes |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
See how the other options fit your plans.
Bring together your size, inflation and setup requirements, then compare the useful differences.