Your needs, this model
Does it fit your priorities?
Can the Queen inflate without a wall socket?
Yes, with a separate USB-A source rated at least 2A, such as a suitable power bank.
Explore this need in the finder →How much room does the Queen need?
Its mattress rectangle is 60 by 80 inches before access space or luggage.
Explore this need in the finder →Will it maintain pressure automatically?
Automatic top-up is not documented; an essential for that function requires explicit evidence.
Explore this need in the finder →The 64114E makes sense when a Queen mattress is necessary but a mains pump would complicate the setup. Its built-in pump runs from a USB-A supply rated at least 2 amps, including an appropriate portable power bank. That is a useful, specific distinction: this is a bed that can be inflated away from a household outlet when the necessary power source is brought along. It is not a self-contained rechargeable bed, and the USB connector should not be mistaken for a battery inside the mattress.
Intex documents an inflated size of 60 by 80 by 12 inches and a maximum total load of 600 pounds. The 12-inch profile sits between very low camping mattresses and much taller guest beds. Choose it for that moderate height and its power flexibility. Someone who needs a seat-height surface for transfers, an integrated folding frame, or a pressure-maintaining pump should make those requirements explicit and compare another design. The official product description does not establish automatic shutoff or automatic overnight replenishment.
Measure room access and Queen bedding
A 60-by-80-inch rectangle occupies roughly 33.3 square feet before anyone can walk around it. In a living room, measure with the door open and the sleeper's luggage in place. A rectangle that clears a sofa by an inch may fit the mattress but still leave an awkward route to the bathroom. The pump connection and its cable also need to remain accessible; placing the bed hard against the one available connection defeats some of the convenience.
The documented dimensions correspond to a standard US Queen footprint, so Queen bedding is the sensible starting point. Check the fitted sheet's pocket depth against the 12-inch profile and the maker's actual inflated shape. The page does not promise compatibility with a particular sheet brand or a built-in sheet-retention system. A sheet that can be fitted at home before the visit is more useful than assuming that every item labelled Queen will behave identically on an inflatable sidewall.
Plan a complete USB power source
The supplied USB cord is eight feet long, and Intex gives about 5.5 minutes as an approximate inflation time. Treat that as planning guidance, not a guaranteed stopwatch result or permission to leave the running pump unattended. Check the output printed on the power source. A USB socket that can charge a small accessory slowly may not satisfy the stated two-amp minimum. If using a car USB adapter, arrange inflation in a suitable location and confirm the adapter rating rather than inferring compatibility merely from the presence of a USB port.
A power bank introduces a useful tradeoff. It can place the bed where the room works best, but it becomes another item to charge and pack. Test the complete cord, source and pump combination before travelling. Keep enough charge available for adjustments and powered deflation; Intex says the integrated USB pump handles both directions. The product page does not specify the capacity of a power bank or promise a particular number of full inflation cycles, so buying by an invented battery-runtime figure would be unhelpful.
Interpret construction and the total load
Fiber-Tech construction and a plush sleeping surface are documented features. They explain the product's construction and finish, but they do not establish how comfortable a particular sleeper will find the bed or how long an individual mattress will last. The 600-pound number is a total load ceiling, not a comfort recommendation or a separate allowance for each side. Include everyone and everything supported by the mattress when comparing the planned load with that rating.
The strongest reason to select the 64114E is the combination of a familiar Queen footprint, a moderate rise and a documented non-mains power route. If the questionnaire says Queen, a lower profile and no household outlet, this is a relevant candidate once an adequate USB source is confirmed. If the answer says a built-in battery, automatic pressure maintenance, or a tall bed is essential, the same description tells you why to keep looking. Compare the exact 64114E package rather than borrowing the dimensions or pump assumptions of another Prestige model.
Source: Intex 64114E official product description and specifications, consulted October 22, 2026.
Sources consulted October 22, 2026: Intex 64114E exact official product page.
Key details at a glance
| Named sleeping size | Queen |
|---|---|
| Bed format | Lower floor mattress |
| Mattress length | 80 in |
| Mattress width | 60 in |
| Bed height | 12 in |
| Rated total load | 600 lb |
| Pump power | USB-A source rated 2A or higher; source separate; included 8-foot USB cord |
| Built-in pump | Yes |
| Pump included | Yes |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
See how the other options fit your plans.
Bring together your size, inflation and setup requirements, then compare the useful differences.
