Your needs, this model
Does it fit your priorities?
Are the two chambers left and right?
No. The maker describes a firmly inflated base and separately adjusted upper chamber.
Explore this need in the finder →How tall is Control Comfort?
Its exact inflated size is 60 by 80 by 22 inches.
Explore this need in the finder →Does chamber adjustment mean automatic top-up?
No automatic pressure-maintenance function is documented.
Explore this need in the finder →The64941E stands out for a specific kind of adjustment. Intex describes two separately controlled chambers: a base inflated firmly and an upper chamber adjusted for the desired softness. That can interest a buyer who wants to change the top while retaining a separately inflated foundation. It does not establish independent left-and-right settings for two sleepers.
Allow twenty-two-inch Queen height and access
The exact dimensions are60 by80 by22 inches and the total maximum load is600 pounds. Twenty-two inches is a high profile, while theQueen rectangle still uses about33.3 square feet before circulation and luggage. Compare entry height with a familiar surface and leave room beside the mattress. An inflated base is not a rigid bed frame or guaranteed transfer support.
Follow the base-then-upper chamber plan
The maker names aFastFillII dual-chamber internal pump. The described operating plan is to inflate the base firmly, then adjust the upper chamber. Read the actual instructions for the controls and sequence rather than treating this as one undifferentiated air volume. The exact page does not state input rating, a non-mains fallback or automatic overnight pressure maintenance.
Separate adjustment is also different from automatic stopping. Neither function should be inferred merely from theControlComfort name. Confirm the actual appliance label before using the motor at the destination and leave controls accessible after bedding is fitted.
Fit sheets and decide whether stacked adjustment helps
Queen sheets are a sensible starting point for the60-by80 footprint. The maker describes plush sides to help keep sheets fitted, but check the actual pocket on the22-inch profile. Construction, pillow-top and surface claims explain the design without establishing independently measured comfort or longevity. The600-pound ceiling is total load, not a per-side allowance.
Choose64941E when stacked-chamber adjustment is the meaningful benefit and a tallQueen fits the room. If two people specifically need separate left/right firmness, or automatic pressure replenishment is essential, this exact description does not establish those capabilities and should not be stretched to meet them.
Sources consulted October 22, 2026: Intex 64941E exact official product page.
Key details at a glance
| Named sleeping size | Queen |
|---|---|
| Bed format | Raised floor mattress |
| Mattress length | 80 in |
| Mattress width | 60 in |
| Bed height | 22 in |
| Rated total load | 600 lb |
| Pump power | FastFill II dual-chamber internal pump; input not stated |
| Built-in pump | Yes |
| Pump included | Yes |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
See how the other options fit your plans.
Bring together your size, inflation and setup requirements, then compare the useful differences.