Your needs, this model
Does it fit your priorities?
What automatic function is explicit?
The EP page says the pump shuts off after 5.5 minutes if not stopped manually.
Explore this need in the finder →Can it inflate without electricity?
Yes. This exact page permits a separate manual pump through its two-in-one valve.
Explore this need in the finder →Does its USB port power the motor?
The page does not identify USB as pump input; check the actual appliance rating.
Explore this need in the finder →The 64925EP is notable for a specific automatic function: its exact Intex page says the pump runs for5.5 minutes and shuts off if it has not been stopped manually. That can interest a buyer who makes automatic stopping an essential questionnaire choice. It is a timed limit, not proof that the bed senses a sleeper's preferred firmness or maintains pressure overnight.
Confirm EP input without misreading the USB port
The documented mattress is60 by80 by18 inches with a600-pound total maximum. Intex describes a firmness-control dial,USB port, laminated sides and bottom and a flocked pillow top. TheUSB port is not identified as pump input. The exactEP page also does not state the motor's electrical input, so we do not borrow110-120V from64925ED. Confirm the actualEP appliance label.
Use the manual valve within household-only scope
The source explicitly permits inflation with a separate manual pump through the two-in-one valve when electricity is unavailable. It also describes releasing air by unscrewing that valve without power. A compatible pump and adapter still need to be supplied. Practise the actual process and read the instructions; neither the timed motor stop nor the valve should be treated as permission to ignore the bed during setup.
The exact page says household use only. A manual fallback therefore does not make this a camping recommendation. It is useful for a home setup without a convenient outlet or as an alternative to the motor, while the product's intended-use restriction stays visible. Automatic overnight top-up remains unestablished.
Plan the raised Queen and bedding
TheQueen rectangle occupies about33.3 square feet before circulation and bags. Eighteen-inch height may suit a raised-bed preference, but an inflatable edge is not a rigid support. Start with Queen bedding and test the fitted pocket on the inflated sides. The pillow-top and lamination claims explain construction without an independent comfort or durability result.
The600-pound ceiling is total load across the mattress, not600 pounds for each side. Choose64925EP when its exact timed stop and manual fallback are useful and the input rating can be checked. Keep it distinct fromED: the shared dimensions do not justify transferring automatic behavior, voltage or setting restrictions between suffixes.
Sources consulted October 22, 2026: Intex 64925EP exact official product page.
Key details at a glance
| Named sleeping size | Queen |
|---|---|
| Bed format | Raised floor mattress |
| Mattress length | 80 in |
| Mattress width | 60 in |
| Bed height | 18 in |
| Rated total load | 600 lb |
| Pump power | Built-in Digital Comfort pump; exact EP input unstated; separate manual pump through a two-in-one valve |
| Built-in pump | Yes |
| Pump included | Yes |
| Automatic inflation stop | Yes |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
See how the other options fit your plans.
Bring together your size, inflation and setup requirements, then compare the useful differences.