Your needs, this model
Does it fit your priorities?
Can a conventional Twin width be assumed?
No. Intex gives 30 by 75 inches for this Jr. Twin.
Explore this need in the finder →Does the package include a pump?
No. The exact 64756E page sells the air pump separately.
Explore this need in the finder →What load and height are stated?
The maximum is 300 lb total with a 10-inch profile.
Explore this need in the finder →The64756E is a30-by75-by10-inch mattress with a300-pound total limit and no included pump. Its Jr. Twin name identifies a narrow product; it does not make the30-inch width equivalent to a standard39-inch Twin. Choose it when a compact sleeping lane is necessary and a separate compatible pump already fits the owner's plans.
Assess the thirty-inch sleeping lane
The mattress rectangle uses about15.6 square feet, but space for the sleeper to stand, the pump nozzle and a clear doorway remains additional. Mark thirty inches across an existing bed to understand the width compromise. That simple exercise cannot predict inflatable comfort, but it can show whether the available room for turning over is acceptable. The75-inch length requires its own check for taller sleepers.
Choose bedding for a nonstandard width
A normal Twin fitted sheet may be loose, while cot bedding can have different length and pocket depth. Compare actual measurements and try the chosen bedding on the inflated ten-inch mattress. The low height is another deliberate compromise; someone who needs a higher entry point may find a raised model more appropriate.
Build the external-pump camp or guest kit
Intex documents home and camping use, Fiber-Tech construction, a plush top and vinyl sides and bottom. These establish design and intended settings rather than measured warmth or service life. The300-pound maximum is a total load ceiling. The size name is not evidence for a child-safety recommendation.
The two-in-one valve permits an external pump connection, but the pump is sold separately. Verify the nozzle and power method before counting on a no-mains setup. No built-in motor or automatic pressure system is documented. Compare64760E if a built-in foot pump would be useful in the same narrow size; keep its instructions and package distinct. Select64756E when its narrow rectangle is the constraint that matters most.
Sources consulted October 22, 2026: Intex 64756E exact official product page.
Key details at a glance
| Named sleeping size | Nonstandard / see actual dimensions |
|---|---|
| Bed format | Lower floor mattress |
| Mattress length | 75 in |
| Mattress width | 30 in |
| Bed height | 10 in |
| Rated total load | 300 lb |
| Built-in pump | No |
| Pump included | No |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
See how the other options fit your plans.
Bring together your size, inflation and setup requirements, then compare the useful differences.