Your needs, this model
Does it fit your priorities?
What is the basic Prestige Full footprint?
It is 54 by 75 by 10 inches with a 600 lb maximum total load.
Explore this need in the finder →Can it meet a built-in-pump essential?
No. 64108E has no built-in pump and sells the external pump separately.
Explore this need in the finder →Is this a low bed?
Yes. Its 10-inch entry height fits a lower-profile preference if the sleeper accepts it.
Explore this need in the finder →The 64108E is a lower Full mattress for an owner who prefers to choose an external pump. Its official page gives54 by75 by10 inches, a600-pound total load ceiling and a two-in-one valve. It explicitly excludes the air pump. That makes it a useful option when a compatible pump is already owned; it is an incomplete travel kit when the pump decision is left until arrival.
Decide whether Full saves enough room
The Full footprint uses about28.1 square feet. It saves six inches in width and five in length compared with a60-by80 Queen, which can matter beside furniture or in a tent. The same reduction limits sleeping room. Two adults should consider both combined load and usable width; a600-pound rating cannot tell them whether54 inches is enough personal space.
Check low entry and sheet fit
At ten inches high, the mattress remains near the floor. Check whether that entry height suits the sleeper before prioritizing small storage or a familiar brand. Start with Full bedding for the documented dimensions and test the fitted-sheet pocket over the inflated sides. The velvety surface and Fiber-Tech interior are design features, not independent evidence of comfort, insulation or service life.
Keep pump configurations and load ratings distinct
Intex describes indoor and outdoor use. For a mains-free trip, choose a compatible manual or battery pump, confirm the adapter and keep the actual kit together. The mattress-only package cannot establish off-grid capability until that pump is known. It also does not supply a built-in motor, automatic stopping or pressure maintenance.
Compare64778E if a six-C-cell pump should arrive with the Full, or64762E if a built-in foot pump is the attraction. The foot-pump Full has a different stated300-pound load, so these are not interchangeable feature bundles. Choose64108E when its exact footprint works and independent pump choice is intentional.
Sources consulted October 22, 2026: Intex 64108E exact official product page.
Key details at a glance
| Named sleeping size | Full |
|---|---|
| Bed format | Lower floor mattress |
| Mattress length | 75 in |
| Mattress width | 54 in |
| Bed height | 10 in |
| Rated total load | 600 lb |
| Built-in pump | No |
| Pump included | No |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
See how the other options fit your plans.
Bring together your size, inflation and setup requirements, then compare the useful differences.